Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Quality & Inspection Services

S.S.Textiles is a Manufactureres, Exporters, Inspection House and General Order Suppliers to facilitate the international & domestic markets in the following areas of inspection:

  • YARN
  • LOOM STATE FABRIC
  • PROCESSED FABRIC & MADE UPS
  • GARMENTS

General Item Inspection

If you are Planning to Import any Item from Pakistan or even you are already importing Goods from Pakistan, S.S.Textiles will be one of the best  options for selection of Suppliers and make sure that products of right quality be shipped to you.

ONLINE AND PRE-SHIPMENT INSPECTION:

  • Equipment Capability Assessment / Inspection of the production unit to  judge that the required Product / Item can be produced with the Equipment and Machinery installed in the Unit.
  • Raw Material Inspection / Inspection of Raw Material before start of Production to make sure that Quality Material be used to get the right product.
  • Online Inspection / Inspection of Goods during production process at different stages to make sure that product of desired specifications produced.
  • Report / Prepare a comprehensive report with suggestions so that in future some problem may not be faced in International as well as in local market.
  • Pre-shipment  Inspection /   Inspection  of  Packed  consignment  before  shipment.
To perform above inspection functions, we have a team of textile graduates and qualified / experienced inspectors who got the goods Inspected in test laboratories of the production Units.
A well equipped independent laboratories also assisting us in getting the samples tested  for verifications.

Testing Items

Testing Standards
A. Composition & Analytical Tests  
1. Fiber Analysis Quantative AATCC 20A/BS 4407/ISO 1833 / ASTM D629/ISO-5088
a) Upto 2 fibers IWS TM 155
b) Upto 2 cellulosic fibres cotton / viscose  
c) Each additional Component --------------------------------------DO--------------------------------------
   
2. Moisture Content / Regain ASTM D2654 / AATCC20A
3. Identification of Dyestuff Qualitative Analysis
   
B. Construction Analysisi  
1. Fabric Weight:  
a) Fabric Weight per unit area ASTM D 3776/DIN/BS EN12127/ISO-3801,
  JISL - 1018 - JISL - 1096 Woven knit
b) Per running Length ASTM D 3766 - BS 2471
   
2. Ends & Picks (Woven Fabrics) ASTM D 3775/ ISO-7211/2
3. Wales & Courses (Stitch Density)  
Knitted Fabric ASTM D 3887/ BS5441
4. Yarn count per Yarn  
a) Woven ASTM 1059/BS 2865/
  /ISO-7211/5 / JISL 1096
b) Knitted ASTM-D 1059 / JISL 1018
   
c) If desizing required (Woven Fabric) BS 2865/ISO-7211/5 TR-5090-1977(E)
d) CV%  
   
5. Fabric width ASTM D 3774/BS 1930/ISO 3932
6. Fabric Thickness ASTM D 1777/BS 2544/ ISO 5084
7. Measuring Bow or Skew  
(woven Fabric as received) ASTM 3882/BS 2819
8. Spirality in Knitted Fabric (as received) In House Method
9. Type of Weave  
10. Yarn Twist / Yarn ASTM 1422/ASTM 1423/ DIN BS EN
  ISO 2061 - ISO 2061
C. Fabric & Garment Shrinkage (Dimensional Stability) & Related Tests
1. Fabric Shrinkage/ Dimensional change AATCC 135/ ISO 6330/
(after one wash) ISO 5077/ DIN 53892, DIN BS EN 25077
a) Each additional wash (Fabric) --------------------------------------DO--------------------------------------
2. Garment Shrinkage/ Dimensional AATCC 150/ ISO 6330/
change (after 1 wash) ISO 5077/ DIN 53892, DIN BS EN 25077
a) Additional wash (Garment)  
3. Appearance a) Home Laundering
b) Wash & wear durable press Fabric/ Fleeced Fabric AATCC 124/ ISO 7768
c) Print durability ISO-6330 / AATCC-135/ 150
d) Seam AATCC 88B/ AATCC 88C/ ISO 7769
e) Garment AATCC 143
f) With 1 Wash - Fabric
g) With 1 Wash - Garment
4. Dimensional Stability to Dry a) Fabric
Cleaning (commercial process) b) Garment
5. Appearnace after Dry Cleaning a) Commercial Process 1 Cycle
6. Skewness/ Twisting after Laundering AATCC 179
7. Cold water immersion BS-4736/ ISO - 7771
D. Colour Fastness Tests  
1. Washing:  
a) Low to medium temp.(30'c t0 60'c) a) AATCC-61-1A & 2A/BS-1006 C01-
     C03; C06 A-C/ BS EN20105-C01-C03
C06 A-C/DIN 54013, & 54010,
CAN Method 191, AS 2001, 4.15 Test
A-E, JISL - 0844
b) High temperature.(60'c - 70'c -95'c) b) AATCC-3A, 4A /BS-1006-C04,C05,
     C06 D-E/ , ISO-105-C04-C05, C06 D-E/
DIN 54011, DIN EN 20105 C04, JISL-
0844 Test C4, AS-2001, 4.15 Test F
 
c) With Chloride c) AATCC 61 5A
2. Perspiration AATCC-15/BS-1006 E04/ISO-105
  E04/DIN-54020.
3. Dry & Wet Crocking/Rubbing AATCC 8/BS 1006 x 12/ISO 1006 x
  12/BS EN ISO 105 x 12
4. Light by Exposure to MBTL Exposure upto 35 hours or 10AFU
     Exposure upto 50 hours
Exposure upto 65 hours or 20AFU
Exposure upto 100 hours
 
5. Light by Exposure to Xenon (Air cooled) BS 1006 BO2 / ISO-105-BO2 / BS EN
  ISO 105 BO2/ AATCC 16H
a) Grade 4 or below  
b) Grade 5  
c) Grade 6  
d) Upon special Request (Grade 8)  
Light by Exposure to Xenon AATCC 16 E
(Water cooled)  
a) 20 Fading units or below  
b) 40 Fading units  
c) 80 Fading units  
d) 150 Fading units  
6. Water BS 1006-E01/ISO 105 E01/ DIN 54005-
  6/AATCC-107
7. Water AATCC 107
8. Chlorinated water DIN / BS EN ISO 105 E03
9. Sea Water AATCC 106/ BS 1006 E 02/ DIN 54007
10. Dry Cleaning AATCC 132/ BS 1006 DO1 /ISO 105
  DO1/ DIN 54024
11. Bleaching a) Actual laundering using Chlorine -
      Non-Chlorine Bleach
b) Hypochlorine BS 1006 NO1 /DIN /BS
EN 20105 NO1/ISO 105 NO1
c) Peroxide BS 1006 NO2/ Iso 105
NO2 / AATCC 101
12. Chlorine bleach Spot Test - SS TEXTILE in House Test Method
  CL-1
13. Non-Chlorine Bleaching a) Spot test, Soaking test - SS TEXTILE in House
   Test Method CL-2
b) AATCC 172
14. Organic Solvents BS 1006 XO5/ ISO 105XO5/ DIN 54023
15. Dye Transfer in Storage AATCC-163
16. Sweet & saliva DIN 53160
17. Phenolic Yellowing Courtaulds Research
18. Water Spotting AATCC 104/ ISO 105E07 / BS1006E07/
  JISL-0853/ DIN 54008/ BS EN ISO105E07
19. Acid Spotting BS1006E05/ ISO 105E05/ JISL0851/
  BS DIN ISO105E05
20. Alkaline Spotting BS1006E06/ ISo105E06/ JISL-0852/ BS /
  DIN EN ISO 105E06/ AS 2001.4.1.2
21. Sublimation during storage JISL 0854
22. Hot Pressing AATCC-133/BS1006X11/ISO 105X11
23. Washing in corporating Bleach Activator ISO 105 CO8
24. Colour Fastness to Benzyol Per Oxide In-House Method
E. Strength Tests  
1. Tensile Strength  
 
a) Grab Method ASTM D5034/ *ISO 13934-2 / BS-EN-ISO
  13934-2 / AS. 2001.1.2.3
*(Supercede ISO 5081-5082)  
b) 2 inch strip ASTM D5035 /BS 2576/ *ISO 13934-2 /
   BS-EN-13934-1 / AS.2001.1.2.3
Performed together with Tensile strength
c) Elongation at break  
2. Bursting Strength Diaphragm Burst - ASTM 3786 / BS4768
  ISO 2960 / DIN EN ISO 13938-1
3. Seam Performance a) Slippage - ASTM 434/ BS 3320
     b) Seam strength ISO 13935-1/ISo13935-2/
ASTM D 1683
c) Seam Bursting Strength ASTM D 3786
d) Garment seam (per seam)
4. Tearing Strength a) Elmendorf ? Elmatear ASTM 1424 / ISO
       13937-1/ Iso 9290
b) Tongue Tear ASTM 2261/Din EN ISO
13937-2/4
c) Wing Rip DIN EN ISO 13937-3 / BS
4303
d) Trapezoid ASTM 5587
5. Loop Strength ASTM D 2256
6. Teancity of Yarn (RKM)  
7. Sing Thread. Yarn Strength a) ASTM D 2256 / BS EN ISO 2062
    b) With CV %
c) Elogation at break when performed
together with single thread / yarn strength
8. Lea Strength a) ASTM D 1578 / BS 6372
  b) With CV %
9. Tensile, Tear, Seam Strength (Arcadia Method) PA10
F. Fabric / Garment Performance & Flammability Tests  
1. Water Repellency:  
a) Spray rating test. AATCC 22 / BS 3702 / ISO 4920
b) Hydrostatic head pressure test BS 2823 / ISO 811 / BS EN 20811 / AATCC 127
2. Water Impact AATCC-42
3. Rain Test AATCC-35
4. Soil Release AATCC 130
5. Oil Repellency AATCC 118
6. Absorbancy of Bleached Textile AATCC 79
7. Abrasion Resistance a) Martindale ISO 12947 1/2/3/4-
     ASTM D 4966 BS 5690
1) Upto 10,000 rubs
2) Subsequent 10,000 rubs
3) Shade Change
8. Pilling Resistance a) Martindale ISO 12945-2 SN 198525
       ASTM D4966 / ASTM D4970
b) ICI Pilling Box ISO 12945-1 / BS5811
1) Upto 3 hours
2) Upto 5 hours
3) Subsequent 5 hours
c) Random Tumbler - ASTM D 3512
9. Snagging Resistance ICI Snag Pod Method
10.Wrinkle / Crease Recovery  
a) Recovery Angle Single Method AATCC 66 / DIN / BSEN
  22313 / ISO 2313
b) Appearance Method AATCC 128 / ISO 9867
11.Stiffness ASTM D 1388 / BS 3356 / AS. 2001.2.9/
  JISL 1018, JISL 1096
12.Stretch & Recovery a) BS 4952 / ASTM D 4964
    b) (i) Extension Modulus
(ii) Additional Modulus
c) Behaviour of elastic bands (Buyer Method)
13.Flammability 45' Test  
i) Textile & Clothing ASTM D 1230 / US CPSC CFR 16 Part
  1610
14.Children Sleepwear Doc FF3 US CPSC CFR 16 Part 1615
  Doc FF3 US CPSC CFR 16 Part 1616
15.Odor in Fabric SS TEXTILE in House Test Method
Your Real Business Companion

S.S Textiles
Suite #392/B,
Millat Town,
Faisalabad - Pakistan
Ph #: 0092 - 300 - 866 9821
0092 - 333 - 555 1417
E-mail: textilehub101@gmail.com

Copyright © S. S. Textiles. All Rights Reserved.

Sister Concern:
MMR Handicrafts

Designed & Hosted by: Anmol